Q&A: Grouping of variations
Once a veterinary product has received approval from the Commission (the “Commission Decision”) all further procedures connected with the product will fall under “Post-Authorisation Procedures”.
This guidance provides an overview for a number of procedures that occur frequently and addresses a number of questions which Marketing Authorisation Holders (MAHs) may have.
More information on this post-authorisation procedural advice Q&A.
As of 1 January 2017 it is mandatory for applicants to use the eSubmission Gateway / Web Client for all veterinary procedural submissions to the Agency. For more information, including links to guidance on registration with the system, see:
- Procedural announcement on mandatory use of eSubmission Gateway for veterinary submissions as of 1 January 2017
- Veterinary eSubmission website
- eSubmission Gateway and Web Client information website
Article 7.2(a) of the Variations Regulation sets-out the possibility for a marketing authorisation holder to group several Type IA/IAIN variations under a single application to the same relevant authority:
- Several Type IA or IAIN affecting one medicinal product.
- one Type IA or IAIN affecting several medicinal products from the same MAH.
- several Type IA and/or IAIN affecting several medicinal products from the same MAH, provided that those variations are the same for all medicinal products and are submitted to the same relevant authority.
Applicants belonging to the same mother company or group of companies and applicants having concluded agreements or exercising concerted practices concerning the placing on the market of the medicinal product(s) concerned, have to be taken as “the same marketing authorisation holder”1
Article 7.2(b) of the Variations Regulation sets-out the possibility for a marketing authorisation holder to group several types of variations affecting one medicinal product, under a single application.
The cases for which this is allowed are listed in Annex III of the Regulation. Any other grouping of variations should first be agreed between the holder and the Agency at least 2 months before submission.
Where the same Type IB or Type II variation, or group of variation(s) affect several medicinal products from the same MAH, the MAH may choose to submit these variations as one application for 'worksharing'. Please also refer to “What is worksharing and what types of variations can be subject to worksharing?”.
1. See Commission Communication 98/C 229/03 OJ C 229, 22.7.1998, p. 4.
It must be noted however, that when submitting Type IA/IAINvariations as part of a group, the legal deadlines for submission of each variation should be respected i.e. a Type IAIN should always be submitted immediately, whether or not it is grouped with other variations, and any Type IA variation should always be submitted within 12 months following its implementation.
When grouping one or more Type IA/IAIN variations affecting several centrally authorised medicinal products from the same MAH, the variation or group of variations must be the same for all medicinal products concerned.
Grouping of other types of variations is only acceptable when they fall within one of the cases listed in Annex III of the Regulation, or, if they do not fall within one of those cases, when the grouping of the variations had been agreed between the Agency and the MAH before submission.
MAHs are advised to inform the Agency at least 2 months in advance of the submission of a group of variations which are not listed in Annex III of the Regulation, together with a justification as to why the holder believes that the proposed group should be acceptable.
- Changes should be consequential and/or related i.e. meaningful to be reviewed simultaneously
- Quality, Safety and Efficacy changes cannot normally be grouped unless justified
- Quality variations to the active substance can normally not be grouped with finished product variations, unless justified
- Grouping should not delay the submission and implementation of updates to the safety information for the medicinal product.
Grouped variations applications should contain the elements listed in Annex IV of the Variations Regulation and should be presented in accordance with the appropriate headings and numbering of the dossier format.
- Cover letter, clearly indicating that the application concerns a group of variations as well as which type of variation is the highest in the group. Indicate whether it is an allowed grouping in Annex III of the variations regulation or the grouping has been agreed with the Agency. The Agency has published a new formatted table template to be inserted in cover letters.
- The completed EU variation application form, declaring all variations included in the group in the section 'type of changes', as well as a justification for the proposed grouping in the 'precise scope and background' section of the application form.
- The present-proposed section of the application form should clearly identify the relevant dossier sections in support of each variation.
- If the group contains an Extension, also the New Application Form duly completed for the Extension should be provided (see also ”How shall I present my extension application?”).
- Supportive documentation for all variations concerned, submitted as one integrated package (i.e. there is no need to submit a separate documentation package for each variation in the group).
- If applicable, one revised summary of product characteristics, labelling and/or package leaflet, including all changes applied for.
- Where the overall design and readability of the outer and immediate packaging and/or package leaflet is affected, the need for the provision of mock-ups should be discussed with the Agency on a case-by-case basis.
The usual procedure number for Type IA variations will be given, with the addition of the suffix “/G”. The procedure number does not distinguish between Type IA or Type IAIN.
The Agency will allocate a 'high-level' cross-products procedure number, which will be used for the handling of procedures which affect more than one medicinal product. A new procedure code (abbreviation) is used for groups of Type IA/IAINvariations i.e. “IG”. As the 'high-level' number cannot be allocated to one single product, the procedure number will therefore contain “xxxx” as a place-holder for the product number.
This 'high-level' procedure number can be obtained from the Agency shortly before submission by sending your request with a copy of the draft cover letter to firstname.lastname@example.org.
Example: EMEA/V/C/prod_nb/IG/002 which was submitted as part of a Type IA/ IAIN group affecting several medicinal products “IG/002”)
The Agency's procedure number will reflect the highest type of variation in the group, with the addition of the suffix “/G”.
MAHs are reminded that procedure numbers are allocated by the Agency upon receipt of the application, according to a sequential order for the product concerned which is independent from the type of regulatory procedure submitted. MAHs should therefore carefully consider which will be the next sequential procedure number for the product concerned, taking into account all other regulatory procedures which were submitted previously (or in parallel), and indicate the correct procedure number on the variation application form.
Grouped variations can be subject to a worksharing procedure, provided that the same group of variations applies to all medicinal products concerned by the worksharing procedure. However, groups including an extension application are excluded from worksharing.
Based on Articles 7 and 20 of the Variations Regulation when the grouping only consists of Type IA/ IAINvariations affecting several marketing authorisations, this is considered as a “group” of variations and not a “worksharing” procedure. However, it is possible to include a group of Type IA/IAINVariation(s) with a Type IB or Type II variation, which is submitted for a worksharing procedure. In such case, the review of the Type IA/IAINvariation will be performed as part of the worksharing procedure.
- a group of a Type II and 3 Type IB variations will follow the timetable of the Type II variation.
- a group of an Extension and a Type II variation will follow the timetable of the Extension.
In case of grouped Type IA/IAINvariations, the Agency will issue a Notification reflecting which variations are accepted or rejected. The MAH shall immediately cease to apply the rejected variation(s) concerned.
Upon finalisation of the review of the grouped variations, the Agency will issue an Opinion/Notification reflecting the final outcome of the procedure and in accordance with the 'highest' remaining approvable variation in the group. Such Opinion/Notification will therefore also list any variations which are not considered approvable, unless these have been withdrawn from the group by the holder during the procedure.
- Extension + Type II --> Extension evaluation procedure. Extension receives a negative assessment outcome (e.g. quality issues); Type II (e.g. new indication) is however positive.
MAH does not withdraw the Extension from the group --> CVMP will adopt a 'composite' opinion the Extension, reflecting both the negative Extension outcome as well as the positive Type II.
- Type II + Type IB --> Type II evaluation procedure. Type II receives a negative assessment outcome; Type IB is however positive.
MAH withdraws the Type II from the group --> Agency will issue a positive notification on the Type IB variation.
In any case, the assessment report will mention the initial and complete scope of the application (listing all variations initially included in the group) and will clarify the procedural timelines and steps taken during assessment.
The post-opinion and decision-making process that will apply to grouped variations, will be that of the 'highest' type of Opinion/Notification issued at the end of the procedure.
Similarly, grouped variations can be implemented according to the provisions corresponding to the 'highest' type of Opinion/Notification issued at the end of the procedure (except for Type IA variations which are by definition already implemented before notification).
If, however, the MAH withdraws the Type II, the Agency will issue a Type IB notification of outcome which will be subject to the 12-monthly MA updating procedure, and the Type IB application can be implemented without awaiting the 12-monthly MA update.
Where a group of variations to the terms of one MA have been approved, the Commission will update the MA with one single decision to cover all the approved variations for the product concerned, following the timeframes for the 'highest' variation reflected in the Opinion/Notification.
Where a group of Type IA/IAINvariations to the terms of several MAs have been approved, the Commission will update the MA with one decision per product concerned, following the decision-making timeframes for Type IA/IAINvariations.
The rules for reduced fees or fee reductions depending on the type of product will apply to grouped variations.
Where a grouping application is considered 'invalid' (i.e. an assessment process cannot be started), an administrative fee may be charged by the Agency.
- Council Regulation (EC) No 297/95 (OJ L 35 of 15 February 1995), as amended
- “Explanatory note on fees payable to the European Medicines Agency”